It sounds great, an Xpozer Frame for easily swapping your photos. But how does it work exactly?
Xpozer has developed the smart Frame, to enable you to always swap the Xpozer Print for your newest favorite. This makes it possible to easily create a new atmosphere in your home.
Perhaps you want a more wintery photo in colder months and a warm colored photo in hot summers. Or you could show your baby’s development every month, because they grow and change so fast!
But how do you swap your Xpozer Print and what makes this system so smart? Learn all about it by watching the video below.
Easy, right? And you can do this as often as you’d like! Every month a new photo? No problem! Our affordable Prints can be mounted on the Frame you already own in no time. That means that, as long as you use Prints of the same size, you’ll only ever need 1 Frame!
Tips from the video:
- Put the old and the new Xpozer on a clean, flat surface.
- Carefully lift your Print by two corners to put it photo side down on the floor or table, or any other clean, flat surface. Leave the protective film on to avoid any damage to the Print.
- Keep the foam sheet and the protective film, to safely store your old Print later.
- Hold the Print between the index fingers and thumbs, by two corners on the shorter side of the Print. Bring the corners to the opposite corners, without folding. Lay your Print on the foam sheet, Print side in.
- Always hold the Print by these two corners, to avoid damage to the Print.
- Make sure to have the bulging side close to you and the flat, open side away from you. Roll the Print carefully. It shouldn’t be too tight, just keep it loose.
- Store the old Print in the new box. This way you’re sure to keep it safe!
Should you have any questions after watching the video, don’t hesitate to contact our customer service!
